| Key Features |
|---|
| Archive scan across the entire film width (edge-to-edge) |
| Automatic recognition of all common film formats and perforation types |
| Film transport without contact with the emulsion possible |
| Self-calibrating 2D optical sound extraction for positive & negative soundtrack (COMOPT/SEPOPT) |
| Real-time measurement of emulsion optical density |
| Frame-accurate measurement of longitudinal shrinkage |
| Context-sensitive operator guidance via touch panel |
| Frame-accurate film joining after film break in the Access Copy |
| Marker for comments (frame and/or TC accurate) |
| Automatic detection and logging of bad splices |
| Automatic calibration of device parameters with Calibration-Inspector |
| Primary color correction using selectable and customizable Look-Up-Tables (LUT) |
| Correction of color faded pigments (selectable if required) |
| Detection of perforation position for image stabilization |
| Automatic cropping (selectable if required) |
| Automated file transfer to the destination server |
| Playback While Recording™ (playback speed independent sound and image playback while recording) |
| Film transport speed can be adjusted to the material state during recording |
| Output formats |
|---|
| Mezzanine Format: |
| Container: MOV, Video Codec: ProRes, Audio Codec: PCM uncompressed |
| Proxy: |
| Container: MOV, Video Codec: H.264 (MPEG-4 AVC), Audio Codec: AAC |
| Report of inspection findings |
|---|
| Format: |
| Condition report in PDF format |
| Machine readable report in XML |
| Content: |
| Total number of frames and shots/scenes |
| Film length in meters |
| Damaged or missing perforation |
| Conspicuous splices: Condition, Position and quantity |
| Graph: Shrinkage profile over time |
| Precise measuring the perforation edges |
| Automatic documentation of mechanical/photographic damage |
| Minimum and maximum density (D-min, D-max) |
| Measurement and documentation of Color density shifts / dye fading / color bleaching |
| Markers that can be positioned manually frame accurate |
| Operator comments: image-related and project-related |
| QUADRIGA quality assessment: overall photographic condition |
| QUADRIGA quality assessment: overall mechanical condition |
| Monitoring |
|---|
| HDR Monitor UltraWide (CinemaScope format) |
| Audio-visual display of image and sound during recording |
| Vectorscope, RGB Parade, Audio level |
| UltraWide monitor: 34 Inch |
| Number of pixels: 3.440 x 1.440 (WQHD) |
| Aspect ratio: 21:9 format (≈ 2,35:1) |
| Film Transport |
|---|
| Continuous sprocketless film transport without capstan and without toothed rollers |
| No clamping pressure plate (no film gate) |
| Perforation detection by laser and additional 2D image analysis |
| Jog/Shuttle control function |
| Auto-stop mode for sticky film layers (adjustable) |
| Highly sensitive control of the film tension down to 0.5 Newton (and up to 5 Newton) |
| Optimized film path and minimization of necessary deflection rollers |
| Minimized mechanical load on archive film due to large 70mm diameter deflection rollers |
| Separate sets of 35 & 16 mm deflection rollers / no combined roller compromises |
| No transport problems even with extreme degrees of shrinkage |
| No transport problems even with extreme thick splices |
| No transport problems even with extreme unprofessional splices |
| Straightforward operation without PC & mouse control |
| Touch screen operation directly at the film table |
| Limitation of rewind speed (library-wind for film safety) |
| Limitation of rewind acceleration (library-wind for film safety) |
| Adjustable film transport stop at specified film core diameter |
| Adjustable film transport slowdown before end of winding |
| Automatic stop at end of winding |
| Correct film transport even if perforation is temporarily missing |
| Correct film transport even with temporarily complete glued perforation holes |
| Film capacity: up to 2000 feet (600 meters) |
| Adjustable scanning speed between 1 and 25 frames/second |
| Supported film formats |
|---|
| Super-16 and Normal-16mm (single and double-sided perforated) |
| 35mm (2, 3, 4-perf) |
| Support for anamorphic image formats (scope format, anamorphic de-squeeze option) |
| Supported film Types |
|---|
| Negative, intermediate, interpositive, print, reversal film (monochrome and color) |
| Nitrofilm suitable |
| Light source |
|---|
| Diffuse cold light LED light source |
| Suitable for nitro film |
| Optical Sound head |
|---|
| Optical Sound reading function from the scanned image (extracts also 2 ch sound) |
| Supported optical sound types: different variants of variable density and variable area |
| Supports photosilver and hi-magenta and cyan soundtracks |
| Also supports corrected reading of sound negatives |
| Automatic continuous readjustment of the soundtrack position |
| Reads soundtracks at any transport speed |
| Options |
|---|
| Separate magnetic sound heads for COMMAG and SEPMAG (16 and 35mm) |
| PTR cleaning rollers |
| Synchronous coupling of two INSPECTIONscan desks for SEPMAG/SEPOPT |
| Film reels (optional split reels) |
| Synchronous desk coupling for third party sound follower |
| Foot pedal control of the film desk (shuttle mode) |
| Integrated barcode reader (optional) |
| UltraWide HDR monitor (flat, optional curved) |
| Up to 36 TB internal RAID mass storage |
| PC Workstation |
|---|
| Powerful workstation |
| CPU: |
| AMD Ryzen 9 7950X |
| 16 cores / 32 threads |
| clock speed up to 5.7GHz |
| RAM: 64 GB DDR5 |
| 1x NVMe M.2 SSD for operating system |
| 1x NVMe M.2 SSD for data |
| Noise-reduced tower case |
| Network connection 2.5GbE/1GbE, 10GbE for camera connection only |
| Operation Rrequirements |
|---|
| desk dimensions (H x W x D): |
| ~37” x 40” x 35” (94cm x 100cm x 88cm) (unit with table frame) |
| ~13” x 40” x 35” (32cm x 100cm x 88cm) (unit without table frame) |
| weight: |
| 132 lbs (60 kg) (incl. table stand and workstation) |
| Power supply: |
| Power connection: Alternating current |
| 100...120 / 60 Hz or 220...240V / 50 Hz |
| Power consumption: |
| 850 W (under full load) |
| Humidity: |
| relative humidity 40 %...60 % non condensing |
| Temperature range: |
| 59°F…77°F (15°C…25°C) |
| Air conditioner recommended |
| Workplace requirements: |
| min. 9.8 ft x 6.6 ft x 8.2 ft (3.0 m x 2.0 m x 2.5 m) (L x W x H) |
| minimum distance 8” (20 cm) left and right, 20” (50 cm) behind the screen |
| Dust-free, anti-static floor coverings |
Notice: Some of the features described above are additional-cost options and not included in the base price of the INSPECTIONscan.